Pneumatic Vendors > GC Valves

Pneumatic Vendors > GC Valves

General Purpose Solenoid Valves, Industrial Solenoid Valves, Manifolds and Assemblies

Go to PDF Files

Product Offering

GC Valves Direct Acting S30 and S31

Direct Acting - S30 and S31

2-way Normally Closed and Normally Open
3-way Normally Closed and Normally Open
Universal operation modes
Vacuum to 1050 psi
Cv to 1.7
Orifices to 3/8"
Brass and Stainless Steel bodies
Buna, Viton, EPR, Teflon, Rulon seals
1/8", 1/4", 3/8" NPT ports

GC Valves Direct Acting S33

Direct Acting - S33

3-way, all ports in body
Normally Closed, Normally Open, Universal
0 to 200 psi
Cv to .38
Orifices to 11/64"
Brass and Stainless Steel bodies
Buna, Viton seals
1/8", 1/4" NPT ports

GC Valves Piloted Diaphragm S21

Piloted Diaphragm - S21

2-way Normally Closed and Normally Open
Vacuum to 250 psi
Cv to 29
Orifices to 1-1/2"
Brass and Stainless Steel bodies, NORYL
Plastic, Buna, Viton, EPR, Teflon seals
3/8" to 2" NPT ports

GC Valves Zero Diff Piloted Diaphragm S20 S27

Zero Differential Piloted Diaphragm - S20 and S27

2-way Zero Differential Normally Closed and Normally Open
3-way Zero Differential Normally Closed and Normally Open
Vacuum to 200 psi
Cv to 28
Orifices to 1-1/4"
Brass and Stainless Steel bodies, NORYL
Plastic, Buna, Viton, EPR seals
3/8" to 2" NPT ports

GC Valves Piloted Piston S40

Piloted Piston - S40

2-way Normally Closed and Normally Open
3-way Normally Closed and Normally Open
Vacuum to 300 psi
Cv to 18.75
Orifices to 1-1/8"
Brass and Stainless Steel bodies
Buna, Viton, Teflon seals
1/4" to 1-1/4" NPT ports

GC Valves 3-Way Zero Diff Piloted Diaphragm

Zero Pressure Differential- M20

3-way Piloted Diaphragm
Normally Closed, Normally Open and Diverting
0 to 140 psi
Cv to 6.7
Orifice 3/4"
Brass and Stainless Steel bodies
Nitrile, Viton, EPR seals
3/4" NPT ports

 

GC Valves 3-Way 4 psi MOPD Piloted Diaphragm

4 psi Minimum Operating Pressure Differential- M21

3-way Piloted Diaphragm
Normally Closed, Normally Open and Diverting
4 to 200 psi
Cv to 6.7
Orifice 3/4"
Brass and Stainless Steel bodies
Nitrile, Viton, EPR seals
3/4" NPT ports

GC Valves Lever Acting Universal K13

Lever Acting Universal- K13

3-way Lever Acting Universal
0 to 275 psi
Cv to 1.27
Orifices to 13/32"
Forged Brass body
Stainless Steel seals
3/8" to 3/4" NPT ports

GC Valves Special Purpose PV1C

Special Purpose- PV1C

2-way Normally Closed
0 to 250 psi
Cv to 1.0
Orifices to 1.4"
Die Cast Aluminum body
Buna seals
1/8", 1/4" NPT ports

GC Valves Cost Saver S51

Special Purpose- S51 (Cost Saver)

2-way Normally Closed and Normally Open
3-way Normally Closed and Normally Open
Diverter, Selector modes
Vacuum to 250 psi
Cv to 0.395
Orifices to 5/32"
Brass, Stainless Steel, Polypropylene bodies
Buna, Viton, EPR seals
1/8" NPT ports

Standard Options:

GC Valves

Special Purpose- PV1C

  • Angle Body
  • Axial Body
  • Corrosion Resistant Materials
  • Coil Leads to 10 feet
  • Cryogenic Variations
  • Explosion Proof Housing
  • High Pressure to 2000 psi
  • High Temperature
  • High Vacuum
  • Latching
  • Low Power Consumption
  • Manifolds
  • Manual Override
  • Metering (Flow Control)
  • Mountiing Brackets
  • Oxygen Service
  • Rectified Coil

GC VALVES designs and manufactures highest quality solenoid valves. Variations are available to handle any liquid or gas, from high flow/high pressure; cryogenics to steam; natural gas to fuel oil; air and water to reagents and enzymes; ultra-pure to corrosive. Brass and stainless steel body construction as well as many plastic bodies offered, in pipe sizes from 1/8 to 2 inch, 2-way and 3-way operation, in single valve, manifold and explosion proof designs.

GC Valves Technical Specifications

  • 1491 N. Kealy St., Suite #4
  • Lewisville, TX 75057
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • 888-420-4430
  • 972-420-1123
  • Fax: 972-420-1103